Leaching of copper and zinc from spent antifouling paint particles

Leaching of Cu and Zn from a composite of spent antifouling paint particles, containing about 300 mg g⁻¹ and 110 mg g⁻¹ of the respective metals, was studied in batch experiments. For a given set of simulated environmental conditions, release of Cu was independent of paint particle concentration due to attainment of pseudo-saturation, but Zn was less constrained by solubility effects and release increased with increasing particle concentration. Leaching of Cu increased but Zn decreased with increasing salinity, consistent with mechanisms governing the dissolution of Cu₂O in the presence of chloride and Zn acrylates in the presence of seawater cations. Because of complex reaction kinetics and the presence of calcium carbonate in the paint matrix, metal leaching appeared to be greater at 4 °C than 19 °C under many conditions. These findings have important environmental and biological implications regarding the deliberate or inadvertent disposal of antifouling paint residues.     

Which compounds contribute most to elevated airborne exposure and corresponding health risks in the Western Balkans?

A majority of ongoing monitoring of persistent organic pollutants (POPs) is currently focused on chemicals emphasized in the Stockholm Convention. Quantitative detection of other substances (especially those with numerous anthropogenic sources such as polyaromatic hydrocarbons (PAHs)) is, however, also needed since their concentrations are usually several orders of magnitude higher. A goal of this study was to determine how various groups of compounds contribute to total human health risks at the variety of sampling sites in the region of Western Balkan. Distribution of the risks between the gas and particulate phases was also addressed. Results showed that inhalation exposure to organochlorine pesticides (OCPs) does not represent a significant risk to humans, while polychlorinated biphenyls (PCBs) re-volatilized to the atmosphere from contaminated soils and buildings can pose a problem. PCB evaporation from primary sources (currently used PCB-filled transformers or non-adequate storage facilities) generally resulted in much higher atmospheric concentrations than evaporation from the secondary sources (soils at the sites of war destructions). A majority of the human health risks at the urban sites were associated with PAHs. Between 83 and 94% of the cumulative risk at such sites was assigned to chemicals sorbed to particles, and out of it, PAHs were responsible for 99%.     

高含盐水样中悬浮物的准确测定

通过理论分析和大量实验工作，找出了现行国家标准的悬浮物测定方法在测定高含盐污水时的不足之处，并且提出了准确的测定方法。新方法不仅能很好地反映水样的实际状况，而且可以推广应用于各种复杂水样的悬浮物的测定。     

Woody plant roots fail to penetrate a clay-lined landfill: Managment implications

In many locations, regulatory agencies do not permit tree planting above landfills that are sealed with a capping clay, because roots might penetrate the clay barrier and expose landfill contents to leaching. We find, however, no empirical or theoretical basis for this restriction, and instead hypothesize that plant roots of any kind are incapable of penetrating the dense clays used to seal landfills. As a test, we excavated 30 trees and shrubs, of 12 species, growing over a clay-lined municipal sanitary landfill on Staten Island, New York. The landfill had been closed for seven years, and featured a very shallow (10 to 30-cm) soil layer over a 45-cm layer of compacted grey marl (Woodbury series) clay. The test plants had invaded naturally from nearby forests. All plants examined—including trees as tall as 6 m—had extremely shallow root plates, with deformed tap roots that grew entirely above and parallel to the clay layer. Only occasional stubby feeder roots were found in the top 1 cm of clay, and in clay cracks at depths to 6 cm, indicating that the primary impediment to root growth was physical, although both clay and the overlying soil were highly acidic. These results, if confirmed by experimental research should lead to increased options for the end use of many closed sanitary landfills.     

Deposition and Storage of Spheroidal Carbonaceous Fly-Ash Particles in European Mountain Lake Sediments and Catchment Soils

Spheroidal carbonaceous particles(SCPs) are produced only from high temperaturecombustion of fossil-fuels. In mountain lakesystems, they provide an unambiguous indicator ofatmospheric deposition. In order to comparedepositional fluxes of SCPs between mountainareas experiencing various pollutant regimes,intensive bulk deposition sampling was undertakenat five sites across Europe. Catchment soil coresand lake sediment cores were also taken at eachsite to compare SCP storage over the post-industrial period. Atmospheric, sediment and soilSCP data showed similar patterns. Highestcontamination was found in Scotland, Slovakia andSpain with the Austrian site intermediate and themid-Norwegian site least contaminated. A highproportion of accumulated SCPs were found to bestored in catchment soils at each site.Therefore, a significant increase in soilerosion, possibly as a result of future climatechange, could lead to the input of largequantities of catchment stored SCPs and, byimplication, other atmospherically depositedcontaminants to the lake ecosystem.     

Reusability of sewage sludge in clay bricks

Bricks produced from sewage sludge in different compositions were investigated. Results of the tests indicated that the sludge proportion is a key factor in determining the brick quality. Increasing the sludge content results in a decrease in brick shrinkage, bulk density, and compressive strength. Brick weight loss on ignition was mainly due to the contribution of the contained organic matter from the sludge being burnt off during the firing process, as well as inorganic substances found in both clay and sludge. The physical, mechanical, and chemical properties of the bricks that were supplemented with various proportions of dried sludge from 10 to 40wt% and generally complied with the General Specification for Brick as per the Malaysian Standard MS 7.6:1972, which dictates the requirements for clay bricks used in walling in general. A standard leaching test method also showed that the leaching of metals from the bricks is very low.     

Production of radioactive particles for use in environmental studies

This paper presents an aerosol generation technique developed to produce dry aerosol particles of various sizes from aqueous solutions of salt. The technique was tested with sodium chloride, lithium carbonate and uranyl acetate at various aqueous concentrations which produced particles in the size range of 0.13-1.37 microm Mass Median Diameter (MMD). The generated aerosols were acceptably monodisperse with a geometric standard deviation of 1.4-2. Both MMD and Mass Median Aerodynamic Diameter (MMAD) increased significantly (p<0.001) with increased concentration of the salt in solution. The technique can also be used to generate aerosols of different chemical species. The results obtained indicate that the system is convenient for use with various aerosol-forming materials, with a stable particle size distribution being maintained for a long period of steady operation. The technique was successfully applied in wind tunnel studies to simulate the release of submicron radioactive particles and their interception by crops, grass and tree canopies. The relevance and application of the technique in other areas of environmental assessment studies is discussed.     

沈阳市大气可吸入颗粒物水溶性组分的因子分析

选取沈阳市6个监测点位,采集2005年冬、春、夏、秋大气可吸入颗粒物样本。用安捷伦7500型电感耦合等离子体质谱仪分析PM10中19种水溶性组分。用因子分析法分析了沈阳市大气可吸入颗粒物水溶性组分的来源。     

Determination of 10 particle-associated multiclass polar and semi-polar pesticides from small streams using accelerated solvent extraction

A new analytical method using accelerated solvent extraction was developed for the determination of 10 particle-associated polar and semipolar pesticides. In addition, six deuterated analogues of the target compounds were evaluated as internal standards. The method yielded acceptable accuracy (73–103% recovery) and precision (<25% relative standard deviation) for eight compounds. Using size exclusion chromatography (SEC) as cleanup step resulted in higher recoveries compared to solid phase extraction (SPE) cleanup.

Deuterated standards with 10 or more deuterium atoms performed well as internal standards concerning similar recovery and correlation with the target analytes.

The method was employed to extract particle-associated pesticides from 16 streams located in an area with intense agriculture in France. Acetochlor, pirimicarb, tebuconazole, fenpropidin, -endosulfan and chlorfenvinphos were detected at concentrations up to 1 mg kg⁻¹ dry weight. A comparison with aquatic toxicity data indicated potential risk to the benthic fauna exposed to these concentrations of pirimicarb, -endosulfan and chlorfenvinphos.

We suggest that the method presented here be used for the extraction and quantitation of particle-associated polar pesticides.     

Sorption of polycyclic aromatic hydrocarbons (PAHs) to carbonaceous materials in a river floodplain soil

We report on sorption isotherm of phenanthrene (Phe) for river floodplain soil associated with carbonaceous materials, with particular attention being devoted to the natural loading of Phe. Our sorption experiments with original soil samples, size, and density sub-fractions showed that the light fraction had the highest sorption capacity comparable to low rank coals. In addition, the light fraction contributed most for the sorption of Phe in total soil samples. K_oc values for all fractions were in the same range, thus indicating that coal and coal-derived particles in all samples are responsible for the enhanced sorption for Phe. Sorption was strongly nonlinear and the combined partitioning and pore-filling model gave a better fit than the Freundlich sorption model. In addition, the spiked PAHs did not show the same behavior as the naturally aged ones, therefore the accessibility of indigenous background organic contaminants was reduced when coal and coal-derived particles are associated with the soils.